Portable Composite Sampler 3710

Application Areas

, ,

Producer

SKU 73278a4a8696 Category

Simple operation with high capacity for single bottle sampling

The Teledyne ISCO 3710 Portable Composite Sampler combines simple operation and high volume capacity for single-bottle sampling. It collects composite samples – based on time or flow intervals – into a 2.5 gallon glass or polyethylene bottle or a 4 gallon polyethylene bottle.

Read more.

Contact Aquasense

Find further information further down the page or call +45 42 42 50 80.

Transportabel composit prøveoptager 3710
Transportabel composit prøveoptager 3710 åben

Description

Portable Composite Sampler 3710 – Simple operation with high capacity for single bottle sampling

The Teledyne ISCO 3710 Portable Composite Sampler combines simple operation and high volume capacity for single-bottle sampling. It collects composite samples – based on time or flow intervals – into a 2.5 gallon glass or polyethylene bottle or a 4 gallon polyethylene bottle. Up to 24 sampling stop and resume times can be preset for unattended automatic collection.

Installation and programming is a snap. Simply select the options you need from the choices displayed on the two-line, backlit LCD.

With a thermal resistance of R-11, you can be assured of maximum efficiency for cooling samples. A thick, one-inch foam-insulated base keeps the unit more rigid and less affected by ambient temperatures.

​​​​​​​​​​​​​3710 Portable Composite Sampler
Size (Diam x Ht): 19 x 28 inches (49 x 73 cm)
Weight: Dry, less battery – 32 lbs (14.5 kg)
Material: Fiberglass-reinforced plastic with UV-resistant gel coat
Power required: 12 VDC (Supplied by battery or AC power converter.)
Pump
Intake purge: Adjustable air purge before and after each sample.
Tubing life indicator: Provides a warning to change pump tubing.
Pump tubing life: Recommended 500,000 pump counts
Intake suction tubing: Vinyl or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet (1 to 30 m) Length
Maximum lift: 26 ft. (7.9 m)
Repeatability: ±10 ml typical
Typical line velocity @ Head height: 2.5 ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.76 m/s @ 0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m)
Liquid presence detector: Non-wetted, non-conductive sensor detects when liquid sample reaches the pump to automatically compensate for changes in head heights.
Controller
Weight: 11 lbs (5 kg)
Size (HxWxD): 10 x 12.5 x 10 inches (25 x 32 x 25 cm)
Operational temperature: 32° to 120°F (0° to 49°C)
Enclosure rating: NEMA 4X, 6 IP67
Program memory: Non-volatile ROM
Flow meter signal input: 5 to 15 volt DC pulse or 25 millisecond isolated contact closure.
Number of Samples: Up to 200 composite samples. (Fail-safe float shutoff.)
Interface port: 8 pin connector; data output at 2400 baud in ASCII. RS-232 format with handshake.
Clock accuracy: 1 minute per month, typical, for real time clock
Software
Sample frequency: 1 minute to 99 hours 59 minutes, in 1 minute increments. Non-uniform times in minutes or clock times 1 to 9,999 flow pulses
Sample pacing: Uniform time, non-uniform time, flow. Flow pacing is controlled by external flowmeter pulses.
Sample volumes: Programmable from 10 to 9,990 ml in 1 ml increments
Sample retries: If no sample is detected, up to 3 attempts; user selectable
Rinse cycles: Automatic rinsing of suction line up to 3 rinses for each sample collection
Program storage: 3 sampling programs
Sampling stop/resume: Up to 24 real time/date sample stop/resume commands.
Controller diagnostics: Tests for RAM, ROM, pump display, and distributor

Data sheet: Here

Manual: Here

Additional information

Application Areas

, ,

Producer

Related products
No related products were found for this item. Go to product categories here.
Contact Aquasense

Fill out the form and we will get back to you as soon as possible.